Elevated Work Platform Training - EWP Licence - EWP Courses - EWP Training - EWP Ticket - EWP Training Near Me - MultiSkills Training

This course will teach you the skills required to operate a boom-type elevating work platform (ewp) with a boom height of 11 metres or more. With MultiSkills ewp training, you’ll learn how to operate, set-up, position and work safely from a boom-type elevated work platform. In this instance, a boom-type elevating work platform can refer to a hinged device, an articulated device, a telescoping device or a combination of any of these, which are then used to support a platform for elevated materials and personnel.

Before being able to successfully undertake this type of elevated work platform training, students will need to complete pre-training study material supplied by MultiSkills training to ensure that they have the required knowledge for the course. The ewp licence assessment will include knowledge, performance and calculations evaluations by your instructor.

EWP courses teach you the skills to:

  • Operate an elevating work platform with a platform height 11 metres or more
  • Position, stabilise and set up elevating work platforms
  • Understand elevating work platform characteristics and capabilities
  • Estimation of loads
  • Effective communication skills
  • Identify hazards and assess risks associated with operation
  • Conduct pre-operational checks and identify faults
  • Check and assess condition of safety harness and lanyard

Get qualified

Once you have finished the ewp course and been deemed competent by your instructor, you’ll be able to apply for your high risk work licence through WorkSafe Victoria. This application will need to be submitted through their online portal within 60 days of your obtaining a successful notice of assessment from MultiSkills. If you’re interested in completing an ewp course with MultiSkills, get in touch with our expert team via our contact page or give us a call on 1800SKILLS.

Name Date Time Location Available Spaces Cost
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 28 & 29 November 2024 07:45 am - 04:00 pm Geelong Campus 1 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 4 & 5 December 2024 07:45 am - 04:00 pm Werribee Campus 1 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 18 & 19 December 2024 07:45 am - 04:00 pm Werribee Campus 1 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 6 & 7 January 2025 07:45 am - 04:00 pm Geelong Campus 5 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 8 & 9 January 2025 07:45 am - 04:00 pm Werribee Campus 6 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 28 & 29 January 2025 07:45 am - 04:00 pm Werribee Campus 5 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 28 & 29 January 2025 07:45 am - 04:00 pm Geelong Campus 6 $650.00
Apply
Name Date Time Location Available Spaces Cost
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 28 & 29 November 2024 07:45 am - 04:00 pm Geelong Campus 1 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 6 & 7 January 2025 07:45 am - 04:00 pm Geelong Campus 5 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 28 & 29 January 2025 07:45 am - 04:00 pm Geelong Campus 6 $650.00
Apply
Name Date Time Location Available Spaces Cost
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 4 & 5 December 2024 07:45 am - 04:00 pm Werribee Campus 1 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 18 & 19 December 2024 07:45 am - 04:00 pm Werribee Campus 1 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 8 & 9 January 2025 07:45 am - 04:00 pm Werribee Campus 6 $650.00
Apply
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) 28 & 29 January 2025 07:45 am - 04:00 pm Werribee Campus 5 $650.00
Apply
Click here for a PDF course brochure

Important Information

Units of Competency

  • TLILIC0005 – Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

Accreditation & Currency 

  • Usage recommendation: Current
  • This is a nationally recognised unit of competency (https://training.gov.au)
  • This is a high risk work licence issued by WorkSafe Victoria

Age

  • Minimum 18 years

Duration

  • 2 days

Flexible Delivery

  • This course can be delivered to accommodate learning styles and employment arrangements.

Class Sizes

  • Low student to trainer ratio

Location

Assessment Method

  • As per WorkSafe requirements the licence assessment encompasses a knowledge, performance and calculations assessment

Pre-requisite

  • STUDY MATERIAL: Students are to complete pre-training study material supplied by MultiSkills Training

Eligibility

  • As MultiSkills Training is not CRICOS approved we are unable to enrol any students that are on a student VISA. If you are on a student VISA you will need to go to a TAFE or RTO that is CRICOS approved

Entry Requirements

  • Ability to comprehend the English language
  • A USI Number (Unique Student Identifier) Visit: www.usi.gov.au
  • Safety footwear

Additional Information

The licence to perform High Risk Work is issued by WorkSafe Victoria. When the assessor deems you competent, you will need to lodge your licence application and Notice of Assessment within 60 days to obtain a high risk work licence.

You can now apply, renew or amend a high risk work licence online at: https://www.myworksafe.vic.gov.au

You will receive an email from myWorkSafe that contains your Training ID. The email will contain a link that allows you to download the Notice of Assessment (NOA) to enable you to lodge your licence application. All licence applications incur a fee payable to WorkSafe Victoria. Further details can be found at: www.worksafe.vic.gov.au/high-risk-work-licence or by calling WorkSafe on 1300 852 562.

To be eligible to undertake a High Risk Work Licence in Victoria you must be a Victorian resident and be able to provide Government issued photo identification that proves you reside in Victoria, if your photo identification does not have a Victorian address you must also provide one of the following forms of identification upon enrolment:

  • Victorian Firearm Licence
  • Victorian Boat Licence
  • KeyPass or Proof of age card with Victorian address
  • A utility bill – e.g. gas or water bill with Victorian address
  • A bank statement with Victorian address
  • A statutory declaration proving that you reside in Victoria

If you cant provide one of the above please contact the office on 1800 754 557.

Fees

Fee for service

  • $650
  • MultiSkills can also offer V.O.C. (Verification of Competency) options, either on or offsite. Contact us for details.

Reassessment Fees

  • Theory Re-Assessment – $250
  • Practical Re-Assessment – $250

High Risk Work License Application

The licence to perform High Risk Work is issued by WorkSafe Victoria. When the assessor deems you competent, you will need to lodge your licence application and Notice of Assessment within 60 days to obtain a high risk work licence.

You can now apply, renew or amend a high risk work licence online at: https://www.myworksafe.vic.gov.au

You will receive an email from myWorkSafe that contains your Training ID. The email will contain a link that allows you to download the Notice of Assessment (NOA) to enable you to lodge your licence application. All licence applications incur a fee payable to WorkSafe Victoria. Further details can be found at: worksafe.vic.gov.au/high-risk-work-licence or by calling WorkSafe on 1300 852 562.

Contact Us

If you require further information about our elevated work platform courses, or would like to make a booking, please contact our friendly administration team on 1800SKILLS or email us at info@multiskills.com.au

Frequently Asked Questions

Do I need a licence to operate an EWP?

Yes, anyone operating an Boom lift over 11 metres needs to hold a valid WorkSafe licence to perform high risk work. This is to ensure that you are able to work in a way that is safe for yourself, other workers and members of the public. Getting an EWP ticket from MultiSkills will give you the confidence and skills needed to perform in a safe and efficient way.

What does an EWP ticket cover?

An EWP licence covers the knowledge and skills needed to safely operate an elevated work platform with a boom length measuring over 11m in height. To receive an EWP ticket, you will have to complete the assessment required to earn a high-risk work licence. If you do not hold a valid licence and continue to operate an EWP, then you can face serious consequences.

Does an EWP licence cover working at heights?

An EWP licence applies to the operation of elevated work platforms over 11m in height. This is different to the type of ticket required for working safely at heights. MultiSkills Training also provide courses in Working at Heights.

How much does an EWP ticket cost?

An EWP course completed with MultiSkills costs $650 per person. With this training, you’ll learn about stability, communication, hazard detection plus a range of other important skills. We offer affordable pricing and expert teaching to all participants plus flexible modes of delivery to ensure that everyone can learn in a way that suits them.

A valuable addition to your skillset

Get your WorkSafe elevated work platform ticket with MultiSkills Training to give yourself the opportunity of working in a variety of exciting industries today. The courses that we run are conveniently held in Melbourne and Geelong and, for added flexibility, there’s also the option to complete your training onsite at our client’s location. Our mission is to empower Victorian students to realise their full potential through a high-quality learning experience.

Choosing MultiSkills Training for your WorkSafe EWP course means studying at a training organisation that’s proven as an industry leader. All our courses are delivered by highly skilled industry experienced and knowledgeable trainers, and provide you with the practical skills and knowledge you need to succeed.

MultiSkills can also help you to build your skills and get the tickets and licences that you may need in a range of other areas. We offer courses for working at heights, civil construction and confined spaces. You’ll become a valuable addition to any worksite with these tickets.

Get in touch with our friendly team today to discuss your training needs. We pride ourselves on providing exceptional customer care for each and every student who chooses to study with MultiSkills. We provide high-quality learning experiences to equip Victorian students with the skills that they need to succeed in their chosen industry.

Compliance - MultiSkills Training

Ready to take the next step?

Get in Touch